• products
  • suppliers

made in china Silenced Type Breakers

company : Yantai Baicai Machinery Co., Ltd.
address : No. 1 ZHISHUIQIANJIE, ZHIFU DISTRICT, YANTAI

Contact

Description

    YANTAI BAICAI MACHINERY hydraulic bead breakers hammers korea are compatible with all kinds of excavators such as Doosan, Dawoo, Volvo, Hitachi, Kato, Kobelco, Komatsu, Sumitao, Liebheer, Hyundai, Cat, Jonyong, Changjiang, Liugong, Yucai, Case, John Deer, Fotonlovol and Loader etc. All Silenced Type Breakers and spare parts are serviced and supported by YANTAI BAICAI, welcome to send inquiry to us for Silenced Type Breakers , thank you.

Silenced Type Breakers Introduce:

    The power source of the hydraulic bead breaker hammer is the pressure oil provided by the excavator or the pump station of the loader, which can more effectively clean the floating rock and the mud in the crack of the rock in the function of excavating the foundation of the building. The principle of selecting hydraulic breaking hammer is according to excavator type and the environment of working.

Silenced Type Breakers  Working Principle:

    Hydraulic breaker hammer has become an important working tool for excavators, and some people install the hydraulic crushing hammer in the backhole loader  (also known as two busy) or wheel loaders to carry out the crushing operation. Hydraulic breaking hammer, also known as hydraulic breaker or hydraulic Stone breaker.

Silenced Type Breakers  without Accumulator:

Simple structure, Low failures rate

Easy maintenance, low cost and impact energy increase. Therefore, users can reduce the cost of using and maintaining two aspects at the same time.

Silenced Type Breakers  with Accumulator:

    In the case of single strike, the strength will be slightly larger, no space can be found during the installation and maintenance, otherwise the nitrogen will be leaked, which causes the crusher to strike weak and the accumulator diaphragm damaged.

The Function of Accumulator:

The accumulator is filled with nitrogen, which uses hydraulic hammer to reverse the remaining energy and piston during the previous blow.

The energy stored in the tank is stored at the same time, releasing energy at the same time during the second strike, increasing the hitting ability, usually not hitting the crusher itself.

    The accumulator is installed in the case of energy to increase the striking force of the crusher. So there are no accumulators in small hydraulic hammer, and medium and large ones are equipped with energy storage.

1. Latest heat treatment technology
Piston, cylinder, front part of the main body, and other main parts of the gear are all treated by lastest heat treatment equipment. Years of technical heat treatment experience has ensure the quality and stability of our YANTAI BAICAI series product, making us the leading role in the production of broken hammer.
2. Efficient work efficiency & unique valve system

YANTAI BAICAI hydraulic breakers adopt unique hydraulic circuit, requiring less oil, which greatly improve the efficiency of power generation.
3. High Strength and wear resistance steel plate adopted
The bottom of hydraulic bead breaker adopted high strength and wear resistance steel plate, which not only guarantees the long life of breakers, but also enhances the working efficiency. 
4. Combined the oil pressure technology with the leading- edge technology
The advanced crystallization of complete oil pressure and slight oil adjustment was introduced, which guarantees the incredible impact force and durability. And it makes all clients satisfied under any working conditions. 
5. Strong compatibility
Our YANTAI BAICAI hydraulic bead breakers are compatible with all kinds of excavators such as Doosan, Dawoo, Volvo, Hitachi, Kato, Kobelco, Komatsu, Sumitao, Liebheer, Hyundai, Cat, Jonyong, Changjiang, Liugong, Yucai, Case, John Deer, Fotonlovo
l and Loader etc.

Description of Silenced Type Breakers :

YANTAI BAICAI Hydraulic bead breakers, we have three types for your choice:  Side Type,Top Open type, and Box Silenced Type.

YANTAI BAICAI Hydraulic bead breakers Advantages:

1. High Strength and wear resistance steel plate adopted.

2. Suitable with all brands of excavators.

3. Strong compatibility.

4. Unique valve system. SOOSAN series Hydraulic Breakers adopt simple hydraulic circuit system, which use oil less and improve efficiency more.

5. First-class quality: Korean technology used to guarantee the quality.

6.Powerful stroke. Compared with other brand's products, SOOSAN series Hydraulic Bead Breakers has more powerful stroke and reliable performances.

Application of Silenced Type Breakers :

1.Mining: Mountains, mining, crushing, secondary crushing

2.Metallurgy, slag cleaning, ladle furnace demolition, demolition equipment foundation body dissatisfied

3.Railway, tunnel bridge, mountain down.

4.Highway: highway repair, cement pavement broken, foundation excavation.

5.Municipal gardens, concrete crushing, gas engineering construction, the transformation of the old city.

6.Building: the old building demolition, reinforced concrete broken.

7.The ship hull in mussels , derusting

8.Other: ice breaking, breaking the permafrost and vibrating sand.

Operating the Silenced Type Breakers 

* Press Chisel to the object to be broken.

* Strike vertically.

* Once object is broken, stop striking immediately.


Working in high or low outside temperatures:

High: The temperature of hydraulic oil must be ensure it close not exceed the specified temperature limits.

Low: At temperature below 0 degrees centigrade, the carrier must be warmed up prior to use, in the way described by the excavator manufacturer.

Ensure that the hydraulic oil in the carrier is at least at 0 degrees centigrade, before starting up the hydraulic hammer.

Note: The Hydraulic bead breaker hammer and excavator or will not operate to full capacity unit the oil temperature has reached at least 60 degrees centigrade.

Grease:

Always observe the relevant safety regulations when handing oils and greasing.

Every two hours of continuous operation lubricate the chisel with moly-based grease.

To guarantee longer life of chisel and bushing, hydraulic hammer should take high performance grease and genuine parts which is supplied by PTEROSAUR. 

Important!

1. Engine’s rotation speed should be controlled under the one pre-set.

2. Don’t work continuously in hot summer, to prevent too high temperature of hydraulic oil. If oil temperature reaches 80 degrees centigrade, must stop working, until the temperature lowers down.

Important!

Feeding hot hydraulic oil to extremely cold hydrauic bead breaker hammer will cause internal stresses in the unit resulting in its failure.

Important!

If grease is not supplied sufficiently, then high hear is generated due to friction at the moving parts if the hammer. The heat can cause premature wear and cracking of related parts.

Maintenance:

Hydraulic Oil

Please choose No.68 hydraulic oil in winter and No.46 hydraulic oil in summer. Oil should be clean & sufficient during working. Dirty oil will cause damages to the Breaker. Please check regularly if Breaker’s cylinder, accumulator, oil pipes & hoses leak oil. If oil leaks, please replace O‐ring & oil seal in time.

Chisel, Chisel Pin & Bushing

Before each working, check if the chisel pins are in good conditions. Check regularly the clearance between bushing and chisel, too much clearance will cause piston & chisel broken. If outer diameter of chisel abrades more than 3mm, or inner diameter of bushing abrades more than 6mm, please replace new ones.


FAQ

1. Are you a manufacturer?
Yes, our factory was established in 2004

2. Can you produce according to customers' design?
Sure, OEM / ODM service available. We are professional manufacturer for nearly 14 years.

3. What's the MOQ and payment terms?
MOQ is 1 set. Payment via T/T, L/C, Western Union accepted, other terms can be negotiated.

4. How about delivery time?
3-7 working days after receiving the payment.

5. After-sale Service

12months warranty for hydraulic breakers. Detailed warranty for each spare parts of hydraulic breaker as per our warranty policy.

 

6. Impact Test

Every hydraulic breaker will do impact test before shipment.

Package 

1. Inner package hydraulic breakers were packed in stretch film

2. Outside package with export wooden case

3. Hydraulic breaker Package can be as per customers request

Delivery

1. Delivery time: Usually 3-7days (1-5sets) after receiving the payment
2. We can arrange hydraulic breaker shipment by ocean or air transportation according to your request from any port of China.

Contact Information:

Nina Yan

Yantai Baicai Machinery Co., Ltd.

E-mail: nina@yantaibaicai.com

Tel: +86 535 6511307

Mobile(Whatsapp): +86 185 6112 8706

Wechat: 18561128706

Website: www.yantaibaicai.com

    YANTAI BAICAI MACHINERY is one of Hydraulic Breaker MANUFACTURERS in China machinery sector. We hope and strive to bring you cost-effective purchasing enjoyment through our consistent efforts and good service. YANTAI BAICAI is not cheapest price in China,maybe we are not best quality,but we will be your right supplier. Welcome to contact us for more information.


phone number

+8618561128706

e-mail address

nina@yantaibaicai.com

location address

No. 1 ZHISHUIQIANJIE, ZHIFU DISTRICT, YANTAI

leave a message


NAME

EMAIL

PHONE

YOUR MESSAGE